Manually Leveling The Replicator 5th Gen Build Plate
Some users have had issues with the assisted leveling on their Replicator 5th Generation Printers. We have found that using a style similar to the 4th Generation manual leveling process is possible and provides very accurate leveling. Note: Although the term leveling is used we are actually tramming the build plate so it is parallel to the XY Axis on the top. Both the XY Axis and the build plate don’t necessarily need to be level but instead must be true to one another. To manually level the Replicator 5th Generation you will need a sheet of paper to help you determine your distance from the nozzle. The first step will be to manually move the build plate to just slightly below the nozzle height. Grabbing it as shown in the picture above allows you to raise the platform away from the bottom of the printer without effecting the build … Read more